What are the reasons for rust on linear guides?

Linear guides can be divided into three types: roller linear guides, cylindrical linear guides, and ball linear guides. They are used to support and guide moving parts to perform reciprocating linear movements in a given direction. According to the friction properties, linear motion guides can be divided into sliding friction guides, rolling friction guides, elastic friction guides, fluid friction guides, and other types. Today, the editor of Renimoshen in Huzhou will explain to you the reasons for the rusting of linear guide rails. Please follow the editor to continue reading!

The cleaning of the removed deep groove ball bearings is divided into coarse cleaning and fine cleaning. They should be placed separately in containers, and a metal mesh pad should be placed at the bottom to prevent the bearings from directly touching the dirt in the container.

DN>5 × At a high speed of 105, it is necessary to ensure that the motor temperature rises low, does not spill oil, and then reduce power consumption to protect the motor.

The control of its pure content is under certain standards, reducing the pollution of equipment noise on the condition.

Ensure the flexibility of starting and working the linear guide rail under the premise of ultra-low temperature work, and ensure low output power.

Try to delay the protection cycle as much as possible, shorten the shutdown time, increase the production rate of labor, and prevent rust on the linear guide rail through efficient use.